All Build Sdn Bhd

>>Standard Features<< [Options] [Back]

SASH

Solid wood frame members are treated with a water-repellent wood preservative for long-lasting protection and performance. Frame corners are glued and pinned for structural integrity. The skylight frame is designed to be installed separately from the sash. Once the frame is installed, the sash snaps into place.

On the roof window a flexible EPDM rubber gasket lines the entire frame to provide three points of weather strip contact with the sash for superior weathertightness. and easy flashing installation.

Skylight units come with factory applied installation brackets that rotate into position for installation.

SASH

Solid wood sash members on roof windows are treated with a water-repellent wood preservative for long-lasting protection and
performance.

A patented, non-conductive,single-profile glass-fiber reinforced material in Terratone® color on the skylight allows a narrow sash profile for more glass area. The sash snaps onto the frame for easy installation and superior weathertightness.

The structural aluminum sash covers on the roof windows have a high-temperature baked-on acrylic Terratone® color finish for lasting protection.

The skylight sash profile also provides a full-perimeter drywall return channel for easy interior finishing.

A built-in condensation channel is standard on the roof window and skylight.

GLASS

High-quality construction grade silicone and Santoprene gaskets are used to seal the glass to the sash for maximum weathertightness.

High-Performance™ Low-E tempered and High-Performance Sun™ Low-E tempered deliver optimum insulating performance. Both are also available laminated.(Glass option must be specified.)


FLASHING	ROOF WINDOW HARDWARE	SIZING	CUSTOM SIZING

Specially designed Terratone color aluminum flashing protects against water, ice and snow infiltration. Standard flashing is for low-profile roofing materials (shingles). For installations between 60° (20/12 pitch roof) and 80° (68/12 pitch roof), the water deflector is required in addition to shingle flashing. For installations between 9° (2/12pitch roof) and 18.5° (4/12 pitch roof), the incline curb flashing is required. Flashing is required on all installations (flashing option must be specified).	The venting unit operator is located under the insect screen to provide convenient operation. This counter balancing operator provides easy opening and closing with minimal effort.	Skylights are sized for truss and rafter construction. Roof windows are sized for truss construction.	Andersen custom size skylights offer design flexibility for both new construction and remodeling/ replacement. They are particularly useful for "bubble" skylight replacements and are available in any increment between 1627 and 4472 sizes (see size chart).